version.txt

Steps taken for updating v1.2.0.1 to v1.2.0.2 

(0) Replaced the constant value of Firmware version v1.2.0.1 to v1.2.0.2
(1) http port number was changed from 80 to 8080 
(2) Predetermined IP address was switched from 192.168.0.200 to 192.168.1.200 
    (Relating to developing environment)
(3) Maintained comments etc for the message data section of the Web control screen
(4) First line of the message data on the Web control screen:
   <FONT>This tag was replaced with the below <H1> tag.
   <H1>PIC Network Interface Card Version  $8 </H1>